Spare Parts

Annual Blade Change Kit

Rotary Blade

Static Blade

Static Center Back Blade

Static End Back Blade

3/8 x 40 Dowel Pin

3/8 x 40 Dowel Pin

M12 x 30 Cap Screw ZP

M12 x 30 Hex Head Set Screw ZP

Every 2 Years or 4000-5000 Hours

Blade Clearance Adjusting Nut

Seal Collar Adjusting Screw

Seal Collar Opposite Drive End

Lock Washer for locking Item 9 and Item 10 into place

1" x 100mm Dowels

3 off for Non Drive End Block & 3 off for Drive End Block

Full Bearing Package Kit

2 x Timken Bearings 1 x FAG Bearing, Seals, Locknuts, Lockwashers and O-Rings plus Bearing Spacer for Item 22 Timken

Spacer is required as each new Bearing Set has slightly different dimensions and Spacer width is pre-set in our factory. Reduces end play movement

Grease Cartridges 400gm SKF LGEP2

This is the correct and advised Grease to use

5 Cartridges required per Bearing Change

Annual Blade Change Kit

Rotary Blade

Static Blade

End Static Blade, common Interchangeable Blade

Static Center Back Blade

Static End Back Blade

3/8 x 40 Dowel Pin

3/8 x 40 Dowel Pin

M12 x 40 Cap Screw ZP

M12 x 30 Hex Head Screw ZP

M10 x 30 Hex Head Set Screw ZP

Every 2 Years or 4000-5000 Hours

Blade Clearance Adjusting Nut

Seal Collar Adjusting Screw

Seal Collar Opposite Drive End

Lock Washer for locking Item 9 & Item 10 into place

1" x 100mm Dowels

3 off for Non Drive End Block & 3 off for Drive End Block

Full Bearing Package Kit

2 x Timken Bearings 1 x FAG Bearing, Seals, Locknuts, Lockwashers and O-Rings plus Bearing Spacer for Item 22 Timken

Spacer is required as each new Bearing Set has slightly different dimensions and Spacer width is pre-set in our factory. Reduces end play movement

Grease Cartridges 400gm SKF LGEP2

This is the correct and advised Grease to use

5 Cartridges required per Bearing Change